OP1) Generator Battery Charger - Designed for permanent battery connection.. The charger includes a normal or overload condition LED indicator on the front to assist with status identification. The charger operates during cranking and running and accepts multiple AC voltage connections. Includes fitting and wiring when ordered with an ATS or supplied loose. Available in 5 Amp 12 or 24 Volt options.
OP2) Bridging Cables - On the Budget ATS and the Mini MTS the bottom of the switching device requires bridging cables. This is normally done by the customer. These optional cables assist in this connection. Available in 2 Pole or 4 Pole options.
OP3) Mains Fail Test Switch - On the Standard PC ATS a 'mains fail test switch' can be added to the front door and wired into the circuit to check that the panel will work under emergency conditions. (Included on Standard CC ATS)
OP4) Key-lock - The panels include locks that require a tool to open and close them. If more security is required then this option key-lock is available. Only one key-lock is required per door. (Life Safety ATS Panels have two doors - 2 Key-locks are required).
OP5) Dongle for Premium and Life Safety ATS - Communication through the optical port on the door mounted controller can be made via direct connection to a PC USB port (using CX 01 dongle) or via Wi-Fi (using CX 02 dongle).
OP6) 24V Battery and Charger for Mimic / Annunciator panel back-up during power failure.